How To Change Motorcycle Tyres?

 First of all, you need to remove the old motorcycle tyres before you change the motorcycle tyres which is broken.

You should prepare all the required tools before you start to remove the motorbike tire. There are basic tools required for changing motorcycle tires that you should be able to purchase at a motorcycle tire shop including silicone lubricant, tire irons, Breezer tire tool, valve core tool,

compressed air pump, and motorcycle tire changer. You should let all the air out of the tire with the valve core tool and draw an arrow at the edge of the rim with your pencil so that you can see clearly the direction of the spin of the wheel.

Then, you should detach the bead from the rim with the help of a bead breaker tool which is a metallic tool that can be inserted between the mx tires and wheel rim. As spray silicone lubricant on the tire bead can help it come out, you can slip the mc tyres off the rim easily by entering tire irons under the bead. You should keep in mind that you need to remove both sides of the tire until the tire can slip off completely.

Without any doubt, you can use two suitable clamps to push the bead out. You should take a large clamp and set it over the rear motorcycle tire. What’s more, you need to make it tight so that the tired presses down and the bead starts to bend off. Then, you need to make full use of two tire levers to pry the bead up and over the rim as tire levers are simply long metal tabs which can be shoved under the bead. Thus, the backside sits against the rim and then pushes down to pull the tire up.

Next, you should install motorcycle tires carefully and prudently because if you are careless, you may fail to finish this task.

Before you install the best motorcycle tire, you should lubricate the inner walls of the new tire thoroughly by using your lubricated spray or Windex. As you work with new tires such as colored motorcycle tires, you need to keep spraying them to make them slippery and easier to work with.

In addition, you also need to place the new motorbike tire in time so that its spin direction matches the direction you marked earlier on the rim. This is very important for you to obey because the direction of a motorcycle can have a profound impact on your safety.

Now, you should attach one side of the tire to the rim by using the tire irons to pry it in. Moreover, you need to pump some air into the new tire using a compressed air pump so that this tire can be used normally. However, you should keep in mind that the tire can not be inflated fully, which will usually result in a tire burst. You need to seal the tire bead into the rim using the tool immediately. Of course, you need to pump some ceramic dust into the tire and use a valve stem tool to reinsert the valve stem. Finally, you can inflate the new tire to the recommended pressure so that you can use it safely.